Merci pour cette grande page de nostalgie.
et pour les plus agés:
....
3615 ULA
....
finally i managed to connect my m9s-pro with usb/ttl adapter.so i can see every time what happens when i try ro reboot or flash the tv box.so i found that it has an error
reloc_addr =13f4a1c0
copy done
load dtb from 0x1000000 ......
board_usb_stop cfg: 0
Uncompressing Kernel Image ... OK
kernel loaded at 0x01080000, end = 0x01f00db8
Loading Ramdisk to 13c2d000, end 13ec30ed ... OK
Loading Device Tree to 0000000013c21000, end 0000000013c2c003 ... OK
signature:
fdt_instaboot: get header err
Starting kernel ...
uboot time: 3628506 us
the ttl pins are between first and second usb of tv box .so you need to connect to pin 2 tx, pin 3 rx , and pin 4 gnd.
i use PuTTY program. you have to found the serial line of ttl adapter on the pc. in my case is com 15 the speed is 115200 and connection type serial.
Card Prep:
1.) Format an SD card to FAT32. 4GB minimum( I generally use 16 and 32 cards), Class 10 or better recommended. The faster the better.
2.) Download and extract the file, the extracted file will be an image. I use 7Zip for extraction.
3.) Burn the image to the SD card. I use HDD RAW(portable ver.). Programs like Rufus or Win32DiskImager, etc should also work. Caution with HDD RAW, make certain you select the SD card as the target, HDD RAW will write over anything, it does not care about your feelings on the matter. It does have a couple of confirm notices, but be careful anyway.
To Run with prepared card: A few things take place, it does not just boot to Linux first go round.
1.) With the TV box running Android, insert the prepared card in to the box's SD slot or use a USB card reader.
Note: I like to use a card reader with activity LED, so I can see something is happening. The first boot can take a few minutes and the flashing LED is reassuring.
2.) At Android/Settings/About Device/System/updates. Note: You may have the Update and Backup app in the App Drawer.
-From the Update and Backup App, under the UpdateLocale section, click Select, select aml_autoscript.zip, click update.
Note: Leave "Wipe Data" and "Wipe Media" unchecked/unticked. To be clear, do not use those options
-The TV box will reboot, it will do so a couple of times.
-Eventually you will see the initial login prompt.
Initial login credentials, See here for login info on the different images.
-You will be asked to select a new password, do so. You will be asked to create a new User and P/W, do so.
-The box will reboot, this boot will be a bit slow, but ultimately should bring you to the desktop.
If the card's available space does not get expanded, use gparted(may need to install) to expand the Ext partition to fill the card.
compte rendu installation solaire