Thread sur comment gérer de la retrodoc.

La bonne méthode? AVOIR DE LA DOC JUSTEMENT !

Je ne retirerai pas ce que j'ai dit mais je ne suis pas sur que tout soit clair...
on ne peux croire personnes en fait... :/

Changement de point de vue :
https://mastodon.xyz/@Merome/101975281313876845

===

“suicidez-vous” !! SÉRIEUSEMENT !!

Pour être fils de Gendarme vous ne savez RIEN de la difficulté de "maintenir l'ordre" et je ne parle pas des manifestations, NI des "radars".

Les policiers / gendarmes / CRS VOUS SAUVENT la VIE tous les jours !
Ceux qui ont cries cela mérite la TAULE.

Sans parler de ce que veux dire un SUICIDE oO et les familles qui restent derrières !
Bandes de Nazes...

There are many good reasons to use a microservices architecture. In this post, we examine 6 factors to help you decide when to use - and when not to use - microservices.

L'essentiel des évolutions fonctionnelles et techniques de la version Stein d'OpenStack

sudo apt install update-manager-core
sudo do-release-upgrade

hop mise a jour !

Ce poème me parle beaucoup (merci ma chérie de me l'avoir envoyé !)

Depuis ma prime enfance je ne suis pas comme les autres;
Je ne vois pas ce que les autres voient;
Je n’ai pas su tirer mes passions au puits commun.
Ma tristesse ne provient pas de la même source.
Je n’ai pas su éveiller mon coeur à la même joie;
Tout ce que j’ai aimé, je l’ai aimé seul.
Puis, dans mon enfance, à l’aube d’une vie tourmentée,
c’est de chaque profondeur du bien et du mal,
que fut puisé ce mystère qui m’enchaîne toujours.
Du torrent et de la fontaine,
De la falaise rouge de la montagne,
Du soleil qui roulait autour de moi
En son or automnal,
De l’éclair dans les cieux
Qui me frôlait et s’enfuyait,
Du tonnerre et de l’orage,
Et du nuage qui se métamorphosait
(alors que le reste du ciel était bleu)
En démon à mes yeux.

Traduction Stéphane Chabrières

raw.dnsmasq: |-
port=0

Passer en mode root:

su

Visualiser les serveurs DNS renseignés:

getprop | grep dns

Ici, les serveurs DNS utilisés sont de chez Free. Pour les changer, par exemple, par ceux de google voici la commande:

setprop net.dns1 8.8.8.8

Vérification des changements:

getprop | grep dns

Vérification de la prise en compte:

nslookup google.fr

Pi-hole, c'est le genre d'outil à garder au plus vite dans sa malette et de diffuser la bonne parole ! En effet, Pi-hole est un utilitaire sous Linux vous

Un brin de provoc ne fait pas de mal quand il s'agit d'alerter sur la vie privée. Vous appelez ça comment vous des applications préinstallées sur votre

Steam Link App for Raspberry Pi

The Steam Link app extends Steam Link functionality to the Raspberry Pi 3B and 3B+, running Raspbian Stretch. The App uses the same streaming technology as Valve's Steam Link, allowing you to play your favorite games and even spectate VR games right from your Raspberry Pi.

Bastillion is an open-source web-based SSH console that centrally manages administrative access to systems. It acts as a bastion host for administrators with features that promote infrastructure security. Web-based administration is combined with management and distribution of user's public SSH keys. Key management and administration is based on profiles assigned to defined users.

Here are the steps which i will mention below that will let us use the full potential of GSI.

Requirements :

Bootloader Unlocked
TWRP Installed
Ofcourse a working device

Installation Method :

First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom

Post Installation Method :

You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device

In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.

1 - vérifie que le perso que tu contrôle en combat a la capacité "Spécial" activée.

2 - Tu te met en HL niveau 3 ou 4 (4 c'est mieux car tu subis pas de dégats)

3 - Tu fais un arte d'arcane si tu controle Yuri, Raven, Repede, Karol ou Judith. Si tu controle Rita ou Estelle tu lance un sort intermédiaire.

4 - Pendant l'arte d'arcane tu reste appuyer sur B et l'arte mystique s'active et t'as plus qu'a admirer.

Voila j'espere que sa va t'aider =)

PS : Une fois que tu seras a l'aise avec l'arte mystique tu peux enchainer un arte explosif et un arte mystique. Mais essaye de faire un arte mystique avant de passer à cette étape^^

A full-text search engine in rust. Contribute to toshi-search/Toshi development by creating an account on GitHub.

I always wanted to have an oline mangareader for my ereader so I finally decided to make one.
Although the app is far from finished it is finally at an usable state so I present to you the UltimateMangaReader

It allowes you to read you favorite manga on your reader directly without the hassle of downloading and converting mangachapters manually, downloading images on the fly as you are reading.
Some of its current features:

• support for multiple hosts: mangapanda.com, mangawindow.net, mangadex.org, mangatown.com, jaiminisbox.com
• a favorite list: see all your favorite manga on one screen and see if they are updated with new chapters
• UltimateMangaReader will keep track of your reading progress so you can just continue where you left off
• to ensure a smooth reading experience the reader will always preload and render the next few pages while you are reading
• frontlight control
• no ads or simmilar BS

In the future I might add an offline mode.

How to install:

1. Make sure you have sergeyvl12's KoboLauncher installed and running on you device, you can find it here: https://www.mobileread.com/forums/sh...d.php?t=201632

2. Copy the contents of the release zip file (ultimatemangareader.sh and the folder ultimatemangareader) to the folder /.kobo/vlasovsoft on your device.

3. Open the file /.kobo/vlasovsoft/applications.ini and add the following line at any position:
   Ultimate Manga Reader = ultimatemangareader.sh

You can find the source @ https://github.com/Rain92/UltimateMangaReader

I could only test it with my Aura One so the layouts migt be off on other devices.

Feedback or contributions are welcome

Changelog:
v0.6: add support for jaiminisbox.com
v0.7: add battery indicator icon, layout improvements and bugfixes

Fixing a broken system

If you performed a partial upgrade, and the system is broken enough that you are unable to run pacman, boot using a monthly Arch ISO from a USB flash drive, an optical disc or a network with PXE. (Don't follow any of the rest of the installation guide.)

Mount your root filesystem:

[ISO] # mount /dev/rootFilesystemDevice /mnt

Mount any other partitions that you created separately, adding the prefix /mnt to all of them, i.e.:

[ISO] # mount /dev/bootDevice /mnt/boot

Try using your system's pacman:

[ISO] # arch-chroot /mnt
[chroot] # pacman -Syu

If that fails, exit the chroot, and try:

[ISO] # pacman -Syu --sysroot /mnt

If that fails, try:

[ISO] # pacman -Syu --root /mnt --cachedir /mnt/var/cache/pacman/pkg

I followed Mioriin's suggestion and pressed e at the GRUB prompt to edit the config. Then I found the line starting with linux and ending with splash and added a 3 to the end. Then I pressed F10 to boot.

This brought me to a textual TTY screen where I could enter my username/pass and was able to run CLI commands normally. I ran pacman -Syu, hoping that if I let it update itself successfully the problem would magically go away.

It appears that the python package dateutils was installed, and was causing pacman's update to fail. It seems that pacman tries to do big updates in a single transaction, to avoid partial update state due to interruptions, but despite this I think my system got borked by the update attempt.

I uninstalled dateutils with pip uninstall python-dateutils. Then I ran pacman -Syu again and it completed successfully. I ran pacman -Syyu just to make sure that the update was good, and it reported no out-of-date packages. I then also ran pacaur -Syu in the same fashion. After this I checked dateutils with pip list and it appears to have been installed back by the pacman update.

I rebooted and my computer, including GUI, worked as before.

How To Switch Kernels In Manjaro Linux

Particles' changing masses could explain why distant galaxies appear to be rushing away.